C Series Strips - RGB, individually controllable

The C series intelligent LED-Strips are equipped with premium quality, high efficient RGB SMD LEDs. Each C series LED can be individually addressed and controlled, they provide an ideal LED light source for accent, linear, edge lighting applications where colour changing and animation is required. The C series is available in 25mm, 50mm and 100mm pixel pitch, with strip lengths of 250mm for the 25mm pixel pitch version, 250mm and 500mm for the 50mm version and 500mm and 1,000mm for the 100mm pixel pitch version.

 

 

 

The ability to easily divide the C series strips makes this an extremely versatile product. The strips are plug and play and many connection combinations can be achieved, uses strips of differing lengths or use the strips in combination with our addressable LED tile products. This allows for a greater creative thought process to be used when working with this product. Thanks to the proprietary Lehmann-Modulation technology, wide and linear brightness control is possible, even at the lower intensity range, as is flicker-free dimming that is suitable for TV set and installations that require cameras.

 

 

 

The C series LED-Strips can be used for wide range architectural and creative lighting applications. Examples could be accent lighting on walls and floors, display counters or bar elements, use in edge lighting for light-boxes or along a concealed coving, TV studio lighting sets, retail design and on trade fair or exhibition stands. The distance between the individual LEDs is designed to offer a homogeneous and even illumination, when used for backlight applications. The spacing needed to achieve even surface illumination is dependent on the diffuser material. It is typically around 5cm, when measured from the upper surface of the LED board to the rear of the diffuser material. The LED-Strips are mounted with small board holders, that can be fixed directly into any support structure or the buildings fabric. The LED tiles can of course be used without a diffuser or mounted much closer to the diffuser material; this can result in a very creative end solution.

 

 

 

We have various options available for controlling and powering up the C series LED-Strips. They can be connected to our Long Distance Controller, the Sys One controller or System 4 and 4E Power Supplies (with Intelligence). For smaller installations, the LED-Strips can be connected via simple 70W plug in power supply and if dimming is desired we offer the, Big Intelli Monochrome standalone controller. The C series LED-Strips are plug-compatible with the full range of existing intelligent RGB LED system from Progress Lighting. Using a special cross cable, each of the three RGB channels can be used to activate the LED- strips into three separate groups each assigned to a channel with independent control. Thanks to the integrated current regulator, even long power lines do not result in a decrease in brightness.

 

 

 

The C series is a Generation 3 product and offers multiple control protocols, DMX, ArtNet, DVI and SDI, it can also read the Dynamic Pixel Bus Protocol (DBP).By using the DBP, more LED- strips per output are available (up to 3,072 channels). A variable transmission rate enables the best, customised balance of channel count, frame and error rate. The system speed can easily reach the 60 fps update rate and switching between DMX and DPB is possible at all times. The C series firmware can be updated from a central point via the network, which also means that future standards or developments can be supported. Each strip sends status information such as temperature, data error rate, input voltage or LED defects back to the control system so a problem-free remote diagnosis can be made at any time. The C series is a true solid state LED intelligence system.

 

 

 

There are countless combinations available when using our C Series LED-Strips. The boundaries are our generally our limitations, but with intelligence? Of course.

 

 

 

C SERIES FEATURES

  • High-quality Premium LEDs
  • Optimum RGB colour mixing in an SMD-component (no coloured shadow)
  • Automatic Addressing System (Smart-Link ) –no addressing at the board
  • Free patch, colour change and scroll text control software
  • Wide emission angle 115°
  • Linear flicker free light dimming, (suitable for live camera installs)
  • Can be directly connected to 24V DC and DMX 512
  • Even brightness, due to integrated linear regulator
  • Extremely robust and reliable
  • Individual colour calibration & Subsequent  in-service calibration possible
  • through hole plug connectors, perfect for rental or temp installs.
  • Higher contrast due to black lacquered board
  • Flexible fibre glass-reinforced board, with various mounting options
  • Low surface temperature
  • System compatibility
  • Made in EU

 

C25 Strips

C25 Strips

C50 Strips

C50 Strips

C100 Strips

C100 Strips

For more information on our full range of addressable creative LED products please CLICK HERE

This is a demo store for testing purposes — no orders shall be fulfilled. Dismiss