L Series Tile - Monochrome, block controlled

Whether used as a direct display or for backlighting larger areas, our intelligent addressable LED Tiles are ideally suited for projects that want to make statement. Use in showrooms, retail and hospitality as a display or part of a wider lighting scheme, our LED Tiles provide extensive possibilities to extend your creative flare.

 

 

The LED tiles are available in monochrome block-controlled (series L) and individually controllable (series M) modules or RGB group control (series B) and individual controlled (series C) versions. With nine shades of White, from Warm White (2700K) to Cool White (6500K), also available in single colour Amber, Red, Green, Blue and full colour RGB, and these tiles have true versatility.

The L series intelligent LED-Tiles are equipped with high quality, high efficient single colour or White LEDs. The L series LEDs can only be activated and controlled in a single block. They provide an ideal LED light source for all large-area applications for which only one solid light colour is required.

The LED-Tiles L33 are available in seven different shades of white and four colours:

  • Warm white (2700K, bulb)
  • Warm white (3000K)
  • Warm white (3500K)
  • Neutral white (4000K, fluorescent lamp 840)
  • Cold white (5000K)
  • Cold white (5700K)
  • Cold white (6500K, daylight)
  • Red
  • Green
  • Blue
  • Amber

 

 

The L series is supplied as a single large LED-Tile, (L33) that can easily be disassembled by hand into four smaller tiles. The full L33 board offers a 6 x 6 LED matrix that provides a backlight surface area of 200mm x 200mm.  Each smaller tile offers a 3 x 3 LED matrix, providing a 100mm x 100mm footprint.  This is equivalent to a 33mm pixel pitch.
The ability to easily divide the L series tile makes this an extremely versatile product. The tiles will still work in any matrix combination; full tiles, three quarter tiles, half tiles and the smaller single tiles can still work in the same array. This allows for a greater creative thought process to be used when working with this product. Thanks to the proprietary Lehmann-Modulation technology, wide and linear brightness control is possible, even at the lower intensity range, as is flicker-free dimming that is suitable for TV set and installations that require cameras.

The L series LED-Tiles can be used for wide range architectural and creative lighting applications.  Examples could be accent lighting on walls and floors, display counters or bar elements, use in backlighting for light-boxes or stretch ceiling installations, TV studio lighting sets, retail design and on trade fair or exhibition stands. The distance between the individual LEDs is designed to offer a homogeneous and even illumination, when used for backlight applications. The spacing needed to achieve even surface illumination is dependent on the diffuser material. It is typically around 5cm, when measured from the upper surface of the LED board to the rear of the diffuser material. The LED-Tiles are mounted with small board holders, that can be fixed directly into any support structure or the buildings fabric. The LED tiles can of course be used without a diffuser or mounted much closer to the diffuser material; this can result in a very creative end solution.

We have various options available for controlling and powering up the L series LED-Tiles. They can be connected to our Long Distance Controller, the Sys One controller or System 4 and 4E Power Supplies (with Intelligence). For smaller installations, the LED-Tiles can be connected via simple 70W plug in power supply and if dimming is desired we offer the, Big Intelli Monochrome standalone controller. The L series LED-Tiles are plug-compatible with the full range of existing intelligent RGB LED system from Progress Lighting. Using a special cross cable, each of the three RGB channels can be used to activate the LED-Tiles into three separate groups each assigned to a channel with independent control. Thanks to the integrated current regulator, even long power lines do not result in a decrease in brightness. There are countless combinations available when using our L33 LED-Tiles.The boundaries are our generally our limitations, but with intelligence? Of course.
 

 

L SERIES FEATURES

  • High-quality Premium LEDs
  • Even colour reproduction (ANSI batch selected)
  • Wide emission angle 115°
  • Linear flicker free light dimming.
  • Dimmable in a way suitable for camera
  • Can be directly connected to 24V DC and DMX 512
  • Even brightness despite various supply line lengths due to integrated linear regulator
  • Extremely robust and reliable
  • Individual color calibration of fitted LEDs & Subsequent calibration possible
  • Can be re-used for multiple applications with connected (through hole) plug connectors
  • Higher contrast due to black lacquered board
  • Flexible fibre glass-reinforced board, with various mounting options
  • Low surface temperature
  • System compatibility
  • Made in EU​
b series

This is a demo store for testing purposes — no orders shall be fulfilled. Dismiss